Bungalow house

specs, features & pricing
PLAN # 100-469
BASICS
Levels 2
Bedrooms 3
Potential Bedrooms 0
Baths 2.5
Garage Stalls 2
STYLES
Bungalow house plans , Cottage house plans , Craftsman house plans
DESIGNER NOTES

NEED YOUR PLANS NOW?
For the same price as a reproducible master you can have your plans emailed to you, typically same day, in a .PDF format that you can have printed in your desired size at your local print shop. Your .PDF files will also be mailed to you on disk. Speak to one of our sales representatives for more information about this option.

Allow 2 business days for shipping.

CAD: Data-CAD
RE-USE: 50% / Negotiable on large volume
FEATURES
upstairs master bdrm
peninsula/eating bar
covered front porch
wrap around porch
walk-in closet
breezeway
family room/keeping room
friend's entry
open floor plan
daylight basement

DIMENSIONS
Width 58'
Depth 46'
Height 26'
SQUARE FOOTAGE
Heated Square Footage 1759
Main Floor 904
Upper Floor 855
Garage 528
Porch 210
WALL INFORMATION
Exterior Wall Constr 2"x4"
ROOF INFORMATION
Roof Pitch 8:12
CEILING HEIGHTS
Ceiling Main 8
Ceiling Upper 8
Ceiling Details Master Bedrm: vaults to 11'6"
FOUNDATIONS
Basement
Daylight Basement
Crawlspace
Slab
If your foundation preference is not available, please contact us.
PRICING
Plan Sets Price
♦ Reproducible Master (Recommended) $750.00
♦ 8 Copy Construction Set $750.00
♦ 5 Copy Construction Set $650.00
♦ Additional Construction Sets $50.00
♦ Single Set** $585.00
♦ CAD Set $1,300.00
Foundation Options
♦ Basement $250.00
♦ Daylight Basement $350.00
♦ Crawlspace $0.00
♦ Slab $150.00
Other Options
♦ Right-reading Reverse Set $150.00
♦ 2"x6" Framing (Custom Changes) * $295.00
♦ Ceiling Height Change (Custom Changes) * $295.00

* Reproducible Master or CAD needs to be selected for this option. A Custom Change Set Up Fee $395.00 and Custom Printing (1 Copy Set) $50.00 will be charged for custom changes.
* Time Frame: Custom Changes typically take 3-5 weeks to complete and then are shipped directly to you.

** For obtaining bids only. Stamped "Not for Construction". A contractor cannot legally build from plans marked this way. You will receive 90% rebate of Single Set price towards a Construction Set.
Plan Content

Elevations drawn at 1/4" = 1'-0" scale, and includes:
Material labels
Floor-to-floor heights
Roof slope indicators
Attic ventilation notes

Floor Plans drawn at 1/4" = 1'-0" scale, and includes:
All post and beam locations
Door and window sizes
Complete and accurate dimensions
Room labels and interior room sizes
Electrical layouts
Code-related notes
Building section markers
Floor joist type, spacing and direction

Foundation or Basement Plan drawn at 1/4" = 1'-0" scale, and includes:
All post and beam locations
Door and window sizes
Complete and accurate dimensions
All foundation wall and footing sizes
Code-related notes
Building section markers
Floor and deck joist type, spacing and direction
Mechanical equipment location
Electrical layouts

Roof Plan drawn at 1/4" = 1'-0", and includes:
All beam and header locations
Building section markers
Code-related notes
All necessary notes pertaining to the structural system

Building Sections drawn at 1/4" = 1'-0" scale, and includes:
Beam connections and locations
Floor joist type and spacing
Floor-to-floor heights
Non-typical plate heights indicated

Typical wall sections drawn at 1/2" = 1'-0" scale, and includes:
All labels indicating wall construction
Foundation wall thickness and minimum reinforcing
Insulation type and rating

Miscellaneous Notes and Details: Including miscellaneous framing details, stairway details and general notes covering code requirements for residential construction
important information

Please note that in most areas of the country, these house plans will be everything you need to build, but not necessarily everything you need to obtain a building permit.

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see What’s Included?

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Related Posts by Categories

Widget by Scrapur